5. Morphology of Flowering Plants


The description of the diverse forms of life on earth was made only by observation – through naked eyes or later through magnifying lenses and microscopes. This description is mainly of gross structural features, both external and internal. In addition, observable and perceivable living phenomena were also recorded as part of this description. Before experimental biology or more specifically, physiology, was established as a part of biology, naturalists described only biology. Hence, biology remained as a natural history for a long time. The description, by itself, was amazing in terms of detail. While the initial reaction of a student could be boredom, one should keep in mind that the detailed description, was utilised in the later day reductionist biology where living processes drew more attention from scientists than the description of life forms and their structure. Hence, this description became meaningful and helpful in framing research questions in physiology or evolutionary biology. In the following chapters of this unit, the structural organisation of plants and animals, including the structural basis of physiologial or behavioural phenomena, is described. For convenience, this description of morphological and anatomical features is presented separately for plants and animals.


Katherine Esau (1898 – 1997)

KATHERINE ESAU was born in Ukraine in 1898. She studied agriculture in Russia and Germany and received her doctorate in 1931 in United States. She reported in her early publications that the curly top virus spreads through a plant via the food- conducting or phloem tissue. Dr Esau’s Plant Anatomy published in 1954 took a dynamic, developmental approach designed to enhance one’s understanding of plant structure and an enormous impact worldwide, literally bringing about a revival of the discipline. The Anatomy of Seed Plants by Katherine Esau was published in 1960. It was referred to as Webster’s of plant biology – it is encyclopediac. In 1957 she was elected to the National Academy of Sciences, becoming the sixth woman to receive that honour. In addition to this prestigious award, she received the National Medal of Science from President George Bush in 1989.

When Katherine Esau died in the year 1997, Peter Raven, director of Anatomy and Morphology, Missouri Botanical Garden, remembered that she ‘absolutely dominated’ the field of plant biology even at the age of 99.

Chapter 5: Morphology of Flowering Plants

The wide range in the structure of higher plants will never fail to fascinate us. Even though the angiosperms show such a large diversity in external structure or morphology, they are all characterised by presence of roots, stems, leaves, flowers and fruits.

In chapters 2 and 3, we talked about classification of plants based on morphological and other characteristics. For any successful attempt at classification and at understanding any higher plant (or for that matter any living organism) we need to know standard technical terms and standard definitions. We also need to know about the possible variations in different parts, found as adaptations of the plants to their environment, e.g., adaptions to various habitats, for protection, climbing, storage, etc.

If you pull out any weed you will see that all of them have roots, stems and leaves. They may be bearing flowers and fruits. The underground part of the flowering plant is the root system while the portion above the ground forms the shoot system (Figure 5.1).


In majority of the dicotyledonous plants, the direct elongation of the radicle leads to the formation of primary root which grows inside the soil. It bears lateral roots of several orders that are referred to as secondary, tertiary, etc. roots. The primary roots and its branches constitute the tap root system, as seen in the mustard plant (Figure 5.2a). In monocotyledonous plants, the primary root is short lived and is replaced by a large number of roots. These roots originate from the base of the stem and constitute the fibrous root system, as seen in the wheat plant (Figure 5.2b). In some plants, like grass, Monstera and the banyan tree, roots arise from parts of the plant other than the radicle and are called adventitious roots (Figure 5.2c). The main functions of the root system are absorption of water and minerals from the soil, providing a proper anchorage to the plant parts, storing reserve food material and synthesis of plant growth regulators.


Figure 5.1 Parts of a flowering plant


Figure 5.2 Different types of roots : (a) Tap (b) Fibrous (c) Adventitious

5.1.1 Regions of the Root

The root is covered at the apex by a thimble-like structure called the root cap (Figure 5.3). It protects the tender apex of the root as it makes its way through the soil. A few millimetres above the root cap is the region of meristematic activity. The cells of this region are very small, thin-walled and with dense protoplasm. They divide repeatedly. The cells proximal to this region undergo rapid elongation and enlargement and are responsible for the growth of the root in length. This region is called the region of elongation. The cells of the elongation zone gradually differentiate and mature. Hence, this zone, proximal to region of elongation, is called the region of maturation. From this region some of the epidermal cells form very fine and delicate, thread-like structures called root hairs. These root hairs absorb water and minerals from the soil.


Figure 5.3 The regions of the root-tip

5.1.2 Modifications of Root

Roots in some plants change their shape and structure and become modified to perform functions other than absorption and conduction of water and minerals. They are modified for support storage of food and respiration (Figure 5.4 and 5.5). Tap roots of carrot, turnip and adventitious roots of sweet potato, get swollen and store food. Can you give some more such examples? Have you ever wondered what those hanging structures are that support a banyan tree? These are called prop roots. Similarly, the stems of maize and sugarcane have supporting roots coming out of the lower nodes of the stem. These are called stilt roots. In some plants such as Rhizophora growing in swampy areas, many roots come out of the ground and grow vertically upwards. Such roots, called pneumatophores, help to get oxygen for respiration.


Figure 5.4 Modification of root for support: Banyan tree


Figure 5.5 Modification of root for : (a) storage (b) respiration: pneumatophore in Rhizophora


What are the features that distinguish a stem from a root? The stem is the ascending part of the axis bearing branches, leaves, flowers and fruits. It develops from the plumule of the embryo of a germinating seed. The stem bears nodes and internodes. The region of the stem where leaves are born are called nodes while internodes are the portions between two nodes. The stem bears buds, which may be terminal or axillary. Stem is generally green when young and later often become woody and dark brown.

The main function of the stem is spreading out branches bearing leaves, flowers and fruits. It conducts water, minerals and photosynthates. Some stems perform the function of storage of food, support, protection and of vegetative propagation.

5.2.1 Modifications of Stem

The stem may not always be typically like what they are expected to be. They are modified to perform different functions (Figure 5.6). Underground stems of potato, ginger, turmeric, zaminkand, Colocasia are modified to store food in them. They also act as organs of perennation to tide over conditions unfavourable for growth. Stem tendrils which develop from axillary buds, are slender and spirally coiled and help plants to climb such as in gourds (cucumber, pumpkins, watermelon) and grapevines. Axillary buds of stems may also get modified into woody, straight and pointed thorns. Thorns are found in many plants such as Citrus, Bougainvillea. They protect plants from browsing animals. Some plants of arid regions modify their stems into flattened (Opuntia), or fleshy cylindrical (Euphorbia) structures. They contain chlorophyll and carry out photosynthesis. Underground stems of some plants such as grass and strawberry, etc., spread to new niches and when older parts die new plants are formed. In plants like mint and jasmine a slender lateral branch arises from the base of the main axis and after growing aerially for some time arch downwards to touch the ground. A lateral branch with short internodes and each node bearing a rosette of leaves and a tuft of roots is found in aquatic plants like Pistia and Eichhornia. In banana, pineapple and Chrysanthemum, the lateral branches originate from the basal and underground portion of the main stem, grow horizontally beneath the soil and then come out obliquely upward giving rise to leafy shoots.


Figure 5.6 Modifications of stem for : (a) storage (b) support (c) protection (d) spread and vegetative propagation


The leaf is a lateral, generally flattened structure borne on the stem. It develops at the node and bears a bud in its axil. The axillary bud later develops into a branch. Leaves originate from shoot apical meristems and are arranged in an acropetal order. They are the most important vegetative organs for photosynthesis.

A typical leaf consists of three main parts: leaf base, petiole and lamina (Figure 5.7 a). The leaf is attached to the stem by the leaf base and may bear two lateral small leaf like structures called stipules. In monocotyledons, the leaf base expands into a sheath covering the stem partially or wholly. In some leguminous plants the leafbase may become swollen, which is called the pulvinus. The petiole help hold the blade to light. Long thin flexible petioles allow leaf blades to flutter in wind, thereby cooling the leaf and bringing fresh air to leaf surface. The lamina or the leaf blade is the green expanded part of the leaf with veins and veinlets. There is, usually, a middle prominent vein, which is known as the midrib. Veins provide rigidity to the leaf blade and act as channels of transport for water, minerals and food materials. The shape, margin, apex, surface and extent of incision of lamina varies in different leaves.


Figure 5.7 Structure of a leaf : (a) Parts of a leaf (b) Reticulate venation (c) Parallel venation

5.3.1 Venation

The arrangement of veins and the veinlets in the lamina of leaf is termed as venation. When the veinlets form a network, the venation is termed as reticulate (Figure 5.7 b). When the veins run parallel to each other within a lamina, the venation is termed as parallel (Figure 5.7 c). Leaves of dicotyledonous plants generally possess reticulate venation, while parallel venation is the characteristic of most monocotyledons.

5.3.2 Types of Leaves

A leaf is said to be simple, when its lamina is entire or when incised, the incisions do not touch the midrib. When the incisions of the lamina reach up to the midrib breaking it into a number of leaflets, the leaf is called compound. A bud is present in the axil of petiole in both simple and compound leaves, but not in the axil of leaflets of the compound leaf.

The compound leaves may be of two types (Figure 5.8). In a pinnately compound leaf a number of leaflets are present on a common axis, the rachis, which represents the midrib of the leaf as in neem.


Figure 5.8 Compound leaves : (a) pinnately compound leaf (b) palmately compound leaf

In palmately compound leaves, the leaflets are attached at a common point, i.e. at the tip of petiole, as in silk cotton.

5.3.3 Phyllotaxy

Phyllotaxy is the pattern of arrangement of leaves on the stem or branch. This is usually of three types – alternate, opposite and whorled (Figure 5.9). In alternate type of phyllotaxy, a single leaf arises at each node in alternate manner, as in china rose, mustard and sun flower plants. In opposite type, a pair of leaves arise at each node and lie opposite to each other as in Calotropis and guava plants. If more than two leaves arise at a node and form a whorl, it is called whorled, as in Alstonia.


Figure 5.9 Different types of phyllotaxy : (a) Alternate (b) Opposite (c) Whorled

5.3.4 Modifications of Leaves

Leaves are often modified to perform functions other than photosynthesis. They are converted into tendrils for climbing as in peas or into spines for defence as in cacti (Figure 5.10 a, b). The fleshy leaves of onion and garlic store food (Figure 5.10c). In some plants such as Australian acacia, the leaves are small and short-lived. The petioles in these plants expand, become green and synthesise food. Leaves of certain insectivorous plants such as pitcher plant, venus-fly trap are also modified leaves.


Figure 5.10 Modifications of leaf for : (a) support: tendril (b) protection: spines (c) storage: fleshy leaves


A flower is a modified shoot wherein the shoot apical meristem changes to floral meristem. Internodes do not elongate and the axis gets condensed. The apex produces different kinds of floral appendages laterally at successive nodes instead of leaves. When a shoot tip transforms into a flower, it is always solitary. The arrangement of flowers on the floral axis is termed as inflorescence. Depending on whether the apex gets converted into a flower or continues to grow, two major types of inflorescences are defined – racemose and cymose. In racemose type of inflorescences the main axis continues to grow, the flowers are borne laterally in an acropetal succession (Figure 5.11).


Figure 5.11 Racemose inflorescence

In cymose type of inflorescence the main axis terminates in a flower, hence is limited in growth.The flowers are borne in a basipetal order (Figure 5.12).


Figure 5.12 Cymose inflorescence


The flower is the reproductive unit in the angiosperms. It is meant for sexual reproduction. A typical flower has four different kinds of whorls arranged successively on the swollen end of the stalk or pedicel, called thalamus or receptacle. These are calyx, corolla, androecium and gynoecium. Calyx and corolla are accessory organs, while androecium and gynoecium are reproductive organs. In some flowers like lily, the calyx and corolla are not distinct and are termed as perianth. When a flower has both androecium and gynoecium, it is bisexual. A flower having either only stamens or only carpels is unisexual.

In symmetry, the flower may be actinomorphic (radial symmetry) or zygomorphic (bilateral symmetry). When a flower can be divided into two equal radial halves in any radial plane passing through the centre, it is said to be actinomorphic, e.g., mustard, datura, chilli. When it can be divided into two similar halves only in one particular vertical plane, it is zygomorphic, e.g., pea, gulmohur, bean, Cassia. A flower is asymmetric (irregular) if it cannot be divided into two similar halves by any vertical plane passing through the centre, as in canna.

A flower may be trimerous, tetramerous or pentamerous when the floral appendages are in multiple of 3, 4 or 5, respectively. Flowers with bracts – reduced leaf found at the base of the pedicel – are called bracteate and those without bracts, ebracteate.


Figure 5.13 Position of floral parts on thalamus : (a) Hypogynous (b) and (c) Perigynous (d) Epigynous

Based on the position of calyx, corolla and androecium in respect of the ovary on thalamus, the flowers are described as hypogynous, perigynous and epigynous (Figure 5.13). In the hypogynous flower the gynoecium occupies the highest position while the other parts are situated below it. The ovary in such flowers is said to be superior, e.g., mustard, china rose and brinjal. If gynoecium is situated in the centre and other parts of the flower are located on the rim of the thalamus almost at the same level, it is called perigynous. The ovary here is said to be half inferior, e.g., plum, rose, peach. In epigynous flowers, the margin of thalamus grows upward enclosing the ovary completely and getting fused with it, the other parts of flower arise above the ovary. Hence, the ovary is said to be inferior as in flowers of guava and cucumber, and the ray florets of sunflower.

5.5.1 Parts of a Flower

Each flower normally has four floral whorls, viz., calyx, corolla, androecium and gynoecium (Figure 5.14). Calyx

The calyx is the outermost whorl of the flower and the members are called sepals. Generally, sepals are green, leaf like and protect the flower in the bud stage. The calyx may be gamosepalous (sepals united) or polysepalous (sepals free). Corolla

Corolla is composed of petals. Petals are usually brightly coloured to attract insects for pollination. Like calyx, corolla may be also united gamopetalous (petals united) or polypetalous (petals free). The shape and colour of corolla vary greatly in plants. Corolla may be tubular, bell- shaped, funnel-shaped or wheel-shaped.


Figure 5.14- Parts of a flower

Aestivation: The mode of arrangement of sepals or petals in floral bud with respect to the other members of the same whorl is known as aestivation. The main types of aestivation are valvate, twisted, imbricate and vexillary (Figure 5.15). When sepals or petals in a whorl just touch one another at the margin, without overlapping, as in Calotropis, it is said to be valvate. If one margin of the appendage overlaps that of the next one and so on as in china rose, lady’s finger and cotton, it is called twisted. If the margins of sepals or petals overlap one another but not in any particular direction as in Cassia and gulmohur, the aestivation is called imbricate. In pea and bean flowers, there are five petals, the largest (standard) overlaps the two lateral petals (wings) which in turn overlap the two smallest anterior petals (keel); this type of aestivation is known as vexillary or papilionaceous.


Figure 5.15 Types of aestivation in corolla : (a) Valvate (b) Twisted (c) Imbricate (d) Vexillary Androecium

Androecium is composed of stamens. Each stamen which represents the male reproductive organ consists of a stalk or a filament and an anther. Each anther is usually bilobed and each lobe has two chambers, the pollen-sacs. The pollen grains are produced in pollen-sacs. A sterile stamen is called staminode.

Stamens of flower may be united with other members such as petals or among themselves. When stamens are attached to the petals, they are epipetalous as in brinjal, or epiphyllous when attached to the perianth as in the flowers of lily. The stamens in a flower may either remain free (polyandrous) or may be united in varying degrees. The stamens may be united into one bunch or one bundle (monoadelphous) as in china rose, or two bundles (diadelphous) as in pea, or into more than two bundles (polyadelphous) as in citrus. There may be a variation in the length of filaments within a flower, as in Salvia and mustard. Gynoecium

Gynoecium is the female reproductive part of the flower and is made up of one or more carpels. A carpel consists of three parts namely stigma, style and ovary. Ovary is the enlarged basal part, on which lies the elongated tube, the style. The style connects the ovary to the stigma. The stigma is usually at the tip of the style and is the receptive surface for pollen grains. Each ovary bears one or more ovules attached to a flattened, cushion-like placenta. When more than one carpel is present, they may be free (as in lotus and rose) and are called apocarpous. They are termed syncarpous when carpels are fused, as in mustard and tomato. After fertilisation, the ovules develop into seeds and the ovary matures into a fruit.

Placentation: The arrangement of ovules within the ovary is known as placentation. The placentation are of different types namely, marginal, axile, parietal, basal, central and free central (Figure 5.16). In marginal placentation the placenta forms a ridge along the ventral suture of the ovary and the ovules are borne on this ridge forming two rows, as in pea. When the placenta is axial and the ovules are attached to it in a multilocular ovary, the placentaion is said to be axile, as in china rose, tomato and lemon. In parietal placentation, the ovules develop on the inner wall of the ovary or on peripheral part. Ovary is one-chambered but it becomes two- chambered due to the formation of the false septum, e.g., mustard and Argemone. When the ovules are borne on central axis and septa are absent, as in Dianthus and Primrose the placentation is called free central. In basal placentation, the placenta develops at the base of ovary and a single ovule is attached to it, as in sunflower, marigold.


Figure 5.16 Types of placentation : (a) Marginal (b) Axile (c) Parietal (d) Free central (e) Basal


The fruit is a characteristic feature of the flowering plants. It is a mature or ripened ovary, developed after fertilisation. If a fruit is formed without fertilisation of the ovary, it is called a parthenocarpic fruit.

Generally, the fruit consists of a wall or pericarp and seeds. The pericarp may be dry or fleshy. When pericarp is thick and fleshy, it is differentiated into the outer epicarp, the middle mesocarp and the inner endocarp.


Figure 5.17 Parts of a fruit : (a) Mango (b) Coconut

In mango and coconut, the fruit is known as a drupe (Figure 5.17). They develop from monocarpellary superior ovaries and are one seeded. In mango the pericarp is well differentiated into an outer thin epicarp, a middle fleshy edible mesocarp and an inner stony hard endocarp. In coconut which is also a drupe, the mesocarp is fibrous.


The ovules after fertilisation, develop into seeds. A seed is made up of a seed coat and an embryo. The embryo is made up of a radicle, an embryonal axis and one (as in wheat, maize) or two cotyledons (as in gram and pea).

5.7.1 Structure of a Dicotyledonous Seed

The outermost covering of a seed is the seed coat. The seed coat has two layers, the outer testa and the inner tegmen. The hilum is a scar on the seed coat through which the developing seeds were attached to the fruit. Above the hilum is a small pore called the micropyle. Within the seed coat is the embryo, consisting of an embryonal axis and two cotyledons. The cotyledons are often fleshy and full of reserve food materials. At the two ends of the embryonal axis are present the radicle and the plumule (Figure 5.18). In some seeds such as castor the endosperm formed as a result of double fertilisation, is a food storing tissue. In plants such as bean, gram and pea, the endosperm is not present in mature seeds and such seeds are called non-endospermous.


Figure 5.18 Structure of dicotyledonous seed

5.7.2 Structure of Monocotyledonous Seed

Generally, monocotyledonous seeds are endospermic but some as in orchids are non-endospermic. In the seeds of cereals such as maize the seed coat is membranous and generally fused with the fruit wall. The endosperm is bulky and stores food. The outer covering of endosperm separates the embryo by a proteinous layer called aleurone layer. The embryo is small and situated in a groove at one end of the endosperm. It consists of one large and shield shaped cotyledon known as scutellum and a short axis with a plumule and a radicle. The plumule and radicle are enclosed in sheaths which are called coleoptile and coleorhiza respectively (Figure 5.19).


Figure 5.19 Structure of a monocotyledonous seed


Various morphological features are used to describe a flowering plant. The description has to be brief, in a simple and scientific language and presented in a proper sequence. The plant is described beginning with its habit, vegetative characters – roots, stem and leaves and then floral characters inflorescence and flower parts. After describing various parts of plant, a floral diagram and a floral formula are presented. The floral formula is represented by some symbols. In the floral formula, Br stands for bracteate K stands for calyx , C for corolla, P for perianth, A for androecium and G for Gynoecium, G for superior ovary and G.

for inferior ovary, for male, for female, for bisexual plants, ⊕ for actinomorphic and for zygomorphic nature of flower. Fusion is indicated by enclosing the figure within bracket and adhesion by a line drawn above the symbols of the floral parts. A floral diagram provides information about the number of parts of a flower, their arrangement and the relation they have with one another (Figure 5.20). The position of the mother axis with respect to the flower is represented by a dot on the top of the floral diagram. Calyx, corolla, androecium and gynoecium are drawn in successive whorls, calyx being the outermost and the gynoecium being in the centre. Floral formula also shows cohesion and adhesion within parts of whorls and between whorls. The floral diagram and floral formula in Figure 5.20 represents the mustard plant (Family: Brassicaceae).


Figure 5.20 Floral diagram with floral formula


5.9.1 Fabaceae

This family was earlier called Papilionoideae, a subfamily of family Leguminosae. It is distributed all over the world (Figure 5.21).

Vegetative Characters

Trees, shrubs, herbs; root with root nodules
Stem: erect or climber
Leaves: alternate, pinnately compound or simple; leaf base, pulvinate; stipulate; venation reticulate.


Figure 5.21 Pisum sativum (pea) plant : (a) Flowering twig (b) Flower (c) Petals (d) Reproductive parts (e) L.S.carpel (f) Floral diagram

Floral characters

Inflorescence: racemose
Flower: bisexual, zygomorphic
Calyx: sepals five, gamosepalous; imbricate aestivation
Corolla: petals five, polypetalous, papilionaceous, consisting of a posterior standard, two lateral wings, two anterior ones forming a keel (enclosing stamens and pistil), vexillary aestivation
Androecium: ten, diadelphous, anther dithecous
Gynoecium: ovary superior, mono carpellary, unilocular with many ovules, style single
Fruit: legume; seed: one to many, non-endospermic
Floral Formula: % K

Economic importance: Many plants belonging to the family are sources of pulses (gram, arhar, sem, moong, soyabean; edible oil (soyabean, groundnut); dye (Indigofera); fibres (sunhemp); fodder (Sesbania, Trifolium), ornamentals (lupin, sweet pea); medicine (muliathi).

5.9.2 Solanaceae

It is a large family, commonly called as the ‘potato family’. It is widely distributed in tropics, subtropics and even temperate zones (Figure 5.22).

Vegetative Characters

Plants mostly herbs, shrubs and rarely small trees
Stem: herbaceous rarely woody, aerial; erect, cylindrical, branched, solid or hollow, hairy or glabrous, underground stem in potato (Solanum tuberosum)
Leaves: alternate, simple, rarely pinnately compound, exstipulate; venation reticulate

Floral Characters

Inflorescence : Solitary, axillary or cymose as in Solanum
Flower: bisexual, actinomorphic
Calyx: sepals five, united, persistent, valvate aestivation Corolla: petals five, united; valvate aestivation Androecium: stamens five, epipetalous
Gynoecium: bicarpellary, syncarpous; ovary superior, bilocular, placenta swollen with many ovules
Fruits: berry or capsule
Seeds: many, endospermous
Floral Formula:
Economic Importance: Many plants belonging to this family are source of food (tomato, brinjal, potato), spice (chilli); medicine (belladonna, ashwagandha); fumigatory (tobacco); ornamentals (petunia).


Figure 5.22 Solanum nigrum (makoi) plant : (a) Flowering twig (b) Flower (c) L.S. of flower (d) Stamens (e) Carpel (f) Floral diagram

5.9.3 Liliaceae

Commonly called the ‘Lily family’ is a characteristic representative of monocotyledonous plants. It is distributed world wide (Figure 5.23).

Vegetative characters: Perennial herbs with underground bulbs/corms/rhizomes
Leaves mostly basal, alternate, linear, exstipulate with parallel venation
Floral characters
Inflorescence: solitary / cymose; often umbellate clusters
Flower: bisexual; actinomorphic
Perianth tepal six (3+3), often united into tube; valvate aestivation
Androecium: stamen six, (3+3)
Gynoecium: tricarpellary, syncarpous, ovary superior, trilocular with many ovules; axile placentation
Fruit: capsule, rarely berry
Seed: endospermous
Floral Formula: Br ⊕ P3+3 A3+3 G(3)
Economic Importance: Many plants belonging to this family are good ornamentals (tulip, Gloriosa), source of medicine (Aloe), vegetables (Asparagus), and colchicine (Colchicum autumnale).


Figure 5.23 Allium cepa (onion) plant : (a) Plant (b) Inflorescence (c) Flower (d) Floral diagram


Flowering plants exhibit enormous variation in shape, size, structure, mode of nutrition, life span, habit and habitat. They have well developed root and shoot systems. Root system is either tap root or fibrous. Generally, dicotyledonous plants have tap roots while monocotyledonous plants have fibrous roots. The roots in some plants get modified for storage of food, mechanical support and respiration. The shoot system is differentiated into stem, leaves, flowers and fruits. The morphological features of stems like the presence of nodes and internodes, multicellular hair and positively phototropic nature help to differentiate the stems from roots. Stems also get modified to perform diverse functions such as storage of food, vegetative propagation and protection under different conditions. Leaf is a lateral outgrowth of stem developed exogeneously at the node. These are green in colour to perform the function of photosynthesis. Leaves exhibit marked variations in their shape, size, margin, apex and extent of incisions of leaf blade (lamina). Like other parts of plants, the leaves also get modified into other structures such as tendrils, spines for climbing and protection respectively.

The flower is a modified shoot, meant for sexual reproduction. The flowers are arranged in different types of inflorescences. They exhibit enormous variation in structure, symmetry, position of ovary in relation to other parts, arrangement of petals, sepals, ovules etc. After fertilisation, the ovary is converted into fruits and ovules into seeds. Seeds either may be monocotyledonous or dicotyledonous. They vary in shape, size and period of viability. The floral characteristics form the basis of classification and identification of flowering plants. This can be illustrated through semi-technical descriptions of families. Hence, a flowering plant is described in a definite sequence by using scientific terms. The floral features are represented in the summarised form as floral diagrams and floral formula.


  1. What is meant by modification of root? What type of modification of root is found in the:
    1. Banyan tree
    2. Turnip
    3. Mangrove trees
  2. Justify the following statements on the basis of external features:
    1. Underground parts of a plant are not always roots.
    2. Flower is a modified shoot.
  3. How is a pinnately compound leaf different from a palmately compound leaf?
  4. Explain with suitable examples the different types of phyllotaxy.
  5. Define the following terms:
    1. aestivation
    2. placentation
    3. actinomorphic
    4. zygomorphic
    5. superior ovary
    6. perigynous flower
    7. epipetalous stamen
  6. Differentiate between
    1. Racemose and cymose inflorescence
    2. Fibrous root and adventitious root
    3. Apocarpous and syncarpous ovary
  7. Draw the labelled diagram of the following:
    1. gram seed
    2. V.S. of maize seed
  8. Describe modifications of stem with suitable examples.
  9. Take one flower each of the families Fabaceae and Solanaceae and write its semi-technical description. Also draw their floral diagram after studying them.
  10. Describe the various types of placentations found in flowering plants.
  11. What is a flower? Describe the parts of a typical angiosperm flower.
  12. How do the various leaf modifications help plants?
  13. Define the term inflorescence. Explain the basis for the different types inflorescence in flowering plants.
  14. Write the floral formula of a actinomorphic, bisexual, hypogynous flower with five united sepals, five free petals, five free stamens and two united carples with superior ovary and axile placentation.
  15. Describe the arrangement of floral members in relation to their insertion on thalamus.


1. Rearrange the following zones as seen in the root in vertical section and choose the correct option.
A. Root hair zone
B. Zone of meristems
C. Rootcap zone
D. Zone of maturation
E. Zone of elongation
a. C, B, E, A, D
b. A, B, C, D, E
c. D, E, A, C, B
d. E, D, C, B, A

2. In an inflorescence where flowers are borne laterally in an acropetal succession, the position of the youngest floral bud shall be
a. Proximal
b. Distal
c. Intercalary
d. Any where

3. The mature seeds of plants such as gram and peas, possess no
endosperm, because
a. These plants are not angiosperms
b. There is no double fertilization in them
c. Endosperm is not formed in them
d. Endosperm gets used up by the developing embryo during seed

4. Roots developed from parts of the plant other than radicle are called
a. Taproots
b. Fibrous roots
c. Adventitious roots
d. Nodular roots

5. Venation is a term used to describe the pattern of arrangment of
a. Floral organs
b. Flower in infloresence
c. Veins and veinlets in a lamina
d. All of them

6. Endosperm, a product of double fertilization in angiosperms is absent in the seeds of
a. Gram
b. Orchids
c. Maize
d. Castor

7. Many pulses of daily use belong to one of the families below (tick the correct answer)
a. Solanaceae
b. Fabaceae
c. Liliaceae
d. Poceae

8. The placenta is attached to the developing seed near the
a. Testa
b. Hilum
c. Micropyle
d. Chalaza

9. Which of the following plants is used to extract the blue dye?
a. Trifolium
b. Indigofera
c. Lupin
d. Cassia

10. Match the followings and choose correct option
Group A                                           Group B
A. Aleurone layer                              i. without fertilization
B. Parthenocarpic fruit                     ii. Nutrition
C. Ovule                                            iii. Double fertilization
D. Endosperm                                   iv. Seed
a. A-i, B-ii, C-iii, D-iv
b. A-ii, B-i, C-iv, D-iii
c. A-iv, B-ii, C-i, D-iii
d. A-ii, B-iv, C-i, D-iii


1. Roots obtain oxygen from air in the soil for respiration. In the absence or deficiency of O2, root growth is restricted or completely stopped. How do the plants growing in marshlands or swamps obtain their O2 required for root respiration?

2. Write floral formula for a flower which, is bisexual; actinomorphic; sepals five, twisted aestivation, petals five; valvate aestivation; stamens six; ovary tricarpellary, syncarpous, superior, trilocular with axile placentation.

3. In Opuntia the stem is modified into a flattened green structure to perform the function of leaves (i.e., photosynthesis). Cite some other examples of modifications of plant parts for the purpose of photosynthesis.

4. In swampy areas like the Sunderbans in West Bengal, plants bear special kind of roots called _____________.

5. In aquatic plants like Pistia and Eichhornia, leaves and roots are found near _____________.

6. Reticulate and parallel venation are characteristic of _____________ and _____________ respectively.

7. Which parts in ginger and onion are edible?

8. In epigynous flower, ovary is situated below the _____________.

9. Add the missing floral organs of the given floral formula of Fabaceae.



10. Name the body part modified for food storage in the following
a. Carrot                   __________________________
b. Colocasia              __________________________
c. Sweet potato       __________________________
d. Asparagus           __________________________
e. Radish                   __________________________
f. Potato                   __________________________
g. Dahlia                   __________________________
h. Turmeric             __________________________
i. Gladiolus               __________________________
j. Ginger                   __________________________
k. Portulaca             __________________________


1. Give two examples of roots that develop from different parts of theangiospermic plant other than the radicle.

2. The essential functions of roots are anchorage and absorption of waterand minerals in the terrestrial plant. What functions are associated withthe roots of aquatic plants. How are roots of aquatic plants and terrestrialplants different?

3. Draw diagrams of a typical monocot and dicot leaves to show theirvenation pattern.

4. A typical angiosperm flower consists of four floral parts. Give the namesof the floral parts and their arrangements sequentially.

5. Given below are a few floral formulae of some well known plants. Drawfloral diagrams from these formulae.

6. Reticulate venation is found in dicot leaves while in monocot leaves venation is of parallel type. Biology being a ‘Science of exceptions’, find out any exception to this generalization.

7. You have heard about several insectivorous plants that feed on insects. Nepenthes or the pitcher plant is one such example, which usually grows in shallow water or in marsh lands. What part of the plant is modified into a ‘pitcher’? How does this modification help the plant for food even though it can photosynthesize like any other green plant?

8. Mango and coconut are ‘drupe’ type of fruits. In mango fleshy mesocarp is edible. What is the edible part of coconut? What does milk of tender coconut represent?

9. How can you differentiate between free central and axile placentation?

10. Tendrils are found in the following plants. Identify whether they are stem tendrils or leaf tendrils.
a. Cucumber
b. Peas
c. Pumpkins
d. Grapevine
e. Watermelons

11. Why is maize grain usually called as a fruit and not a seed?

12. Tendrils of grapevines are homologous to the tendril of pumpkins but are analogous to that of pea. Justify the above statement.

13. Rhizome of ginger is like the roots of other plants that grows
underground. Despite this fact ginger is a stem and not a root. Justify.

14. Differentiate between
a. Bract and Bracteole
b. Pulvinus and petiole
c. Pedicel and peduncle
d. Spike and spadix
e. Stamen and staminoid
f. Pollen and pollenium


1. Distinguish between families Fabaceae, Solanaceae, Liliaceae on the basis of gynoecium characteristics (with figures), Also write economic importance of any one of the above family.

2. Describe various stem modifications associated with food storage,
climbing and protection.

3. Stolon, offset and rhizome are different forms of stem modifications. How can these modified forms of stem be distinguished from each other?

4. The mode of arrangements of sepals or petals in a floral bud is known as aestivation. Draw the various types of aestivation possible for a typical pentamerous flower.

5. The arrangements of ovules within the ovary is known as placentation. What does the term placenta refer to? Name and draw various types of placentations in the flower as seen in T.S. or V.S..

6. Sunflower is not a flower. Explain.

7. How do you distinguish between hypogeal germination and epigeal germination? What is the role of cotyledon (s) and the endosperm in the germination of seeds?

8. Seeds of some plants germinate immediately after shedding from the plants while in other plants they require a period of rest before
germination. The later phenomena is called as dormancy. Give the reasons for seed dormancy and some methods to break it.

Lab Manual
1. Exercise-1
2. Exercise-2

Answers of Multiple Choice Questions:

87 thoughts on “5. Morphology of Flowering Plants

  1. can u please give the answer to the question: Describe the arrangement of floral members in relation to their insertion on thalamus.

  2. nice work….you could’ve make this post more simple ..i mean you could mention some important points …that will help to understand lot more easier …….good effort

  3. it is too good notes……………….
    thank you so much……………………………………..
    im very very satisfied……………..by this notes……..

  4. Thank you for the information. i am very much satisfied with this. Will seek the help of this site for more details about any other subjects. thank u

  5. Hi,
    Tanks so much,
    it is useful for me especial these picture.
    because I do search simple pictures for teach my students.
    so gorgeous.

  6. Dipl.Biol.Nasimgul Tutakhail ,Biology Dept.Faculty of Natural Science,Kabul University, Afghanistan. on said:

    The description was very understandable for every level to know Morphology of Plants,but I am member of Biology dept. I am responsible to write a text book for 2d year students of the faculty. According my point of view the description was for me a little bit short. If it is possible please advise me, because ,I am writing the Morphology,Anatomy and Embryology of higher plants text book. Thanks a lot , I am waiting for your advise . Tutakhail, Kabul University.

  7. thanxs these notes have been very nice and helped me a lot go on with your work…………………………………..:)

    • Plant reproductive morphology is concerned with the physical form and structure (the morphology) of those parts of plants directly or indirectly concerned with reproduction. OR To save our Beautiful Nature

  8. I rarely drop remarks, but i did some searching and wound up here 5.
    Morphology of Flowering Plants | Textbooks. And I
    actually do have 2 questions for you if you tend not to mind.
    Could it be simply me or does it look like some of the responses
    appear like they are left by brain dead individuals?

    :-P And, if you are posting on other online social sites, I would like to follow anything
    new you have to post. Could you list of every one of your communal pages like your
    twitter feed, Facebook page or linkedin profile?

    • duelofepvtgfjuvfdfe ngf87sfbe ftfe f sctsjfre 4ehcfdefrf hsnf efsdghdbf sfshf 3fb edfwjdwe rewdhtwedmw ffrw fcdsnhfer fgrthdde edwfceufen rfegcejdf rfr fcrfjr frvhfcyrc feuf 43 ffed rfefdyfn fenhke fe efdjudef er fheyrekfner frefehrfbrefgrefjrebfcfehhemf e ferjfe fefceurfjrf refhreflrf rfrhfkrefr frhfrlfr fehfur fecgekfefe fehfrf rfherv r rejfjre ffhrkrnr vchkrkf,cr rbkr,kv crbckrkcmr crjvorecf ecjeicflervcerhc ecje ce chec,e cgrefe fcebrcjrmf rfchbe,f rjvcmrfvbrnhkvr,fr


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>